The Ukee combines a softer nose, firmer tail and pronounced taper. It targets directional riding with drive from the back foot. Its asymmetrical camber distribution describes the longitudinal profile, not an automatic requirement for regular or goofy stance.
Is the Kindred Ukee Split right for your tours?
You place turns deliberately, want support on open lines and are willing to ride actively. This is closer to the alpine or sporting freeride rider in our Gear Guide. Still judge the whole day: after substantial climbing, a demanding build can require more effort than on a fresh demo lap. An elaborate construction makes sense when flex, width and riding style fit together. A demo with familiar boots helps more than comparing carbon names.
What matters on the skin track?
The whole setup matters on the skin track. A board can pivot easily downhill and still need lateral support from boots and bindings. Keep a calm stride and assess edge loading on traverses. A useful balance point matters more for repositioning than weight alone. In deep snow the nose should clear the track; tight kick turns need room for the actual length. Include slow track changes and firm passages in the comparison. An impressive downhill outline alone does not answer that question.
How do you choose length, width and stance?
Confirmed sizes are 146, 150, 154, 158, 162, 166, 170 cm. Start with the manufacturer’s rider-weight range where specified for this version, then check actual boot width at your chosen stance. Height alone is not a reliable sizing method. Between two suitable lengths, the shorter can be easier to move; extra area may help with higher weight or deeper snow. This is not a fixed rule. Distinguish overall length, effective edge and width underfoot. Additional equipment and a heavy pack also change the load.
How should boots, bindings and skins fit?
Our Gear Guide recommends matching boots and bindings together. Lateral support matters in the changing conditions often found in the Alps. Boots should hold your heel, bindings must fit the actual outer sole, and highbacks should suit your weight and riding. Check overhang at your own binding angles; a wide waist alone does not guarantee a good fit. Practise the complete transition at home before doing it with cold fingers on tour. For skins, length, trimming and nose and tail fittings must match. A shared brand name does not mean a skin fits every outline.
Our Splitboard Gear Guide explains the setup relationships.
Which of our test experiences help you choose?
We have not yet tested the Kindred Ukee Split ourselves. This advice uses manufacturer data and our Gear Guide; we do not assign our own riding scores to this version.
For a demo, use the same boots and a familiar stance. Try slow turns, a firm section and transitions as well as the best powder slope. After a longer climb, it is easier to tell whether the size remains manageable. Manufacturer claims about lightness, grip and damping are starting points for that comparison, not editorial measurements.
What has changed since 25/26 or earlier models?
The manufacturer currently lists this model as a regular offer without clearly assigning the entire construction to a new annual development. This is our 26/27 buying guide. A different graphic or price does not prove a changed ride, and we do not assume identity with earlier versions unchecked.
What is included in the price and what else do you need?
Compare like package contents: board, joining hardware, bindings with interface and matching skins are separate items. A product photograph alone does not describe a complete touring setup.
Which alternatives are worth comparing?
Within the brand, compare Kindred Arrowsmith Split, Kindred Tsitika Split, Kindred MRK5 Split. Start with intended use, then compare price and construction. Pay particular attention to width differences at similar lengths. A more expensive construction of a different shape does not guarantee a better fit.
FAQ: What should you know before choosing?
Who should consider this splitboard?
The Ukee combines a softer nose, firmer tail and pronounced taper. It targets directional riding with drive from the back foot. Its asymmetrical camber distribution describes the longitudinal profile, not an automatic requirement for regular or goofy stance.
Which size and width suit me?
Confirmed sizes are 146, 150, 154, 158, 162, 166, 170 cm. Start with the manufacturer’s rider-weight range where specified for this version, then check actual boot width at your chosen stance. Height alone is not a reliable sizing method. Between two suitable lengths, the shorter can be easier to move; extra area may help with higher weight or deeper snow. This is not a fixed rule. Distinguish overall length, effective edge and width underfoot. Additional equipment and a heavy pack also change the load.
Have you tested this board yourselves?
We have not yet tested the Kindred Ukee Split ourselves. This advice uses manufacturer data and our Gear Guide; we do not assign our own riding scores to this version.
What needs to match in the setup?
Our Gear Guide recommends matching boots and bindings together. Lateral support matters in the changing conditions often found in the Alps. Boots should hold your heel, bindings must fit the actual outer sole, and highbacks should suit your weight and riding. Check overhang at your own binding angles; a wide waist alone does not guarantee a good fit. Practise the complete transition at home before doing it with cold fingers on tour. For skins, length, trimming and nose and tail fittings must match. A shared brand name does not mean a skin fits every outline.
What is included in the price and what else do you need?
Compare like package contents: board, joining hardware, bindings with interface and matching skins are separate items. A product photograph alone does not describe a complete touring setup.
How does it differ from the earlier version?
The manufacturer currently lists this model as a regular offer without clearly assigning the entire construction to a new annual development. This is our 26/27 buying guide. A different graphic or price does not prove a changed ride, and we do not assume identity with earlier versions unchecked.
Which sizes and dimensions does the manufacturer list?
Confirmed sizes: 146, 150, 154, 158, 162, 166, 170 cm. Figures are manufacturer data rather than our measurements. Missing or conflicting entries are not filled with estimates. Manufacturer flex and editorial riding scores are different scales.
| Specification | 146 | 150 | 154 | 158 | 162 | 166 | 170 |
|---|---|---|---|---|---|---|---|
| Running length | 1066 mm | 1090 mm | 1118 mm | 1147 mm | 1162 mm | 1183 mm | 1195 mm |
| Nose length | 255 mm | 265 mm | 275 mm | 280 mm | 294 mm | 306 mm | 310 mm |
| Tail length | 140 mm | 145 mm | 150 mm | 154 mm | 165 mm | 175 mm | 195 mm |
| Nose width | 296 mm | 303 mm | 308 mm | 313 mm | 317 mm | 322 mm | 324 mm |
| Tail width | 281 mm | 287 mm | 293 mm | 298 mm | 302 mm | 307 mm | 309 mm |
| Waist width | 244 mm | 252 mm | 258 mm | 263 mm | 267 mm | 271 mm | 274 mm |
| Sidecut radius | 6.5 m | 7 m | 7.5 m | 7.8 m | 8 m | 8.2 m | 8.4 m |
| Stance width | 495 mm | 520 mm | 550 mm | 550 mm | 559 mm | 559 mm | 584 mm |
| Camber profile | Asymmetrical | Asymmetrical | Asymmetrical | Asymmetrical | Asymmetrical | Asymmetrical | Asymmetrical |
| Flex pattern | Mid | Mid | Mid Stiff | Mid Stiff | Mid Stiff | Mid Stiff | Mid Stiff |
| Carbon weight (g) | 2452 | 2574 | 2709 | 2810 | 2926 | 3070 | 3191 |
| Fiberglass weight (g) | 2643 | 2775 | 2920 | 3029 | 3153 | 3309 | 3439 |
| Surface area (cm²) | 3696.53 | 3880.93 | 4084.41 | 4236.62 | 4410.69 | 4628.38 | 4810.53 |
Where do the data, images and test reports come from?
Kindred Ukee Split – manufacturer offer. Checked 19 October 2026. Images and dimensions come from the linked current manufacturer offer. These are manufacturer views, not evidence of our own riding test.
What does the board look like? (5 photos)
Show 1 more images
